12v Latching Relay Automotive – Locking switching relay 12V 25A. 0-728-02 072802 Rating: -25A at 12VDC. Mounting bracket built into the top of the relay. Connections through flat terminals 5 x 6.3 mm. Please note: This relay will NOT fit into a normal relay holder/base. Connections must be made using separate 6.3 mm (1/4 inch) connectors. Latching relays (sometimes called latching, latching, safety, or impulse relays) are often used to “make or break” a circuit. without having to keep the coil energized, this gives the relay the ability to turn the circuit on and off without drawing direct current. The field windings in this mechanical latching relay draw no current after the initial switching operation is complete. 12V+) and S. Connect to the MOMENTARY switch and then apply negative pulse (or negative pulse from ECU or similar), this will then activate the internal excitation coil. a negative pulse pulls the coil and operates a mechanical latch inside the relay, which in turn holds the relay in its selected state (ie on or off). The relay contacts are arranged in an SPDT (Single Pole Double Throw) pattern. l connects to 56B in the off position, pin 56 then connects to 56A when power is applied. These latches are ideal for use in applications where the relay must switch the circuit but not draw current after the initial switching operation is complete.
5 pin 12V DC S.P.C.O. (unipolar switching) Relay 30Amp. Available in packs of 1, 10 or 100 units.
12v Latching Relay Automotive
The relay has 2 male 4.8mm contacts and 2 male 6.35mm contacts. Dimensions 22 (w) x 15 (w) x 25 (h) (excluding…
Genuine Te Connectivity 12v 190 Amp Automotive Relay Flange Mount Spno Bds A 6017613938969
*DIODE PROTECTION* The relay has 2 male 4.8mm contacts and 2 male 6.35mm contacts. Dimensions 22 (w) x 15 (w) x 25 (h) (excluding…
Single relay holder complete with terminals. This unit is suitable for standard 5 and 4 pin automotive relays and is manufactured by AMP, one of the world’s most respected automotive electrical equipment manufacturers.
MICRO relay base. Suitable for car use. Please note: the picture shows only 4 terminals, actually the product comes with 5 terminals.
A 4 or 5 pin relay base/holder to fit our 70A 4 and 5 pin relays
Relays & Harnesses
12v bistable latching relay, 24vdc latching relay, 24 volt latching relay, dpdt latching relay 12v, latching relay module, automotive latching relay, single coil latching relay, mechanical latching relay 12v, 12 volt latching relay automotive, 12v latching relay, 12v dc latching relay, 12v latching relay wiring diagram
